BYD DOLPHIN Electric Vehicle Air Conditioner Compressor

Provided before purchase

1. Photo of the vehicle's factory nameplate (located on the left side of the engine compartment or near the front passenger seat)
2. Photo of the part label (any part is marked with a part ID number)
3. If none of the above photos are available, the vehicle's VIN (Vehicle Identification Number) must be provided

Warning Notice

1. Before installation, thoroughly clean the air conditioning system multiple times. Disconnect the pipes, fill them along with the condenser and evaporator with cleaning solution, and soak for approximately 20 minutes until the drained solution runs clear.
2. Replace the dryer bottle.
3. Clean the expansion valve (or replace it with a new one).
4. Thoroughly clean the condenser surface, evaporator core surface, and evaporator filter.
5. Verify that the cooling fan operates normally.